Slim Column Path Bollard

• Short: Dia 4.7" x H 11.8" / Dia 12 cm x H 30 cm
• Medium: Dia 4.7" x H 23.6" / Dia 12 cm x H 60 cm
• Tall: Dia 4.7" x H 31.5" / Dia 12 cm x H 80 cm
• Choosing a height: the shortest sits low among planting and lights the ground immediately around it; the middle height clears low borders and is the usual choice for a walkway edge; the tallest reads as a proper landscape marker at a turn, a level change or a driveway entrance
• Spacing: set bollards 6–10 ft apart along a path so the pools of light meet and the route reads continuously
• Setback: position 12–18" back from the path edge, clear of foot traffic and mower lines
• Staggering: on a wide path, alternate sides rather than pairing units opposite each other — it lights the same run with roughly half the fittings
• Turns and level changes: add a unit at each turn, step and driveway entrance, where the route needs to be read before it is reached
• Conduit routing: hardwired — bring the supply up through a buried conduit stub at each position, set before any paving or planting goes in

The Slim Column Path Bollard from Solae Design is a narrow vertical marker for lawns, borders and walkways. The body is a plain 4.7 inch column with a fixed LED set inside, casting light down and outward across the ground rather than up into the eye. On a path at night the effect is a run of soft pools that show the route without turning the garden into a car park.

Three heights change the job the fixture does. The shortest sits low among planting and lights the ground immediately around it. The middle height clears low borders and is the usual choice for a walkway edge. The tallest reads as a proper landscape marker, useful at a turn, a level change or a driveway entrance where the light needs to be seen from further off. All three share the same slim footprint.

The bollard is die-cast aluminum with a polycarbonate diffuser, which is the combination that survives repeated freeze, heat and irrigation cycles without chalking. It carries an IP65 rating for permanent exposure and runs on AC 110–240V as standard, with custom DC 12V and DC 24V versions available for low-voltage landscape circuits. Three color temperatures are offered, though warm light is the usual specification in a domestic garden.

• Body material: die-cast aluminum with PC diffuser
• Finishes: black
• Light source: integrated LED
• Power: approximately 10W
• Voltage: AC 110–240V; custom DC 12V and DC 24V versions available on request
• Color temperature: warm light 3000K, neutral light 4500K or cool light 6000K
• Mounting: hardwired — compatible with common wall switches (not included)
• Moisture resistance: IP65 waterproof grade — do not immerse in water — outdoor use
• Best for: lawns, aisles, corridors, gardens, parks and driveways

Enjoy hassle-free 30-day returns with no restocking fees, free returns for damaged or incorrect items, and fast refunds after approval. We offer free shipping on every order, with 1–2 business day processing, 7–10 business day delivery, and tracking provided with every order.

Need help? Contact us anytime at info@solaedesign.com. See our Return & Refund Policy and Shipping Policy for full details.